Shopping Cart Shopping Cart - 0 item(s) / Total: $0
Home > HERMS coils Custom coils > 3/8" Coils

6" Coil with 2 vertical bends 25' x 3/8" x .035 OD Tubing 304/304L HERMS/Fermentor coil

Part Number 11A03X6252V
review 1 Review(s)
5
6" Coil with 2 vertical bends 25' x 3/8" x .035 OD Tubing 304/304L   HERMS/Fermentor coil
6" Coil with spacing
Email a friend Email a friend
Write a Review Write a Review
Price
Your Price:  
$54.59
Quantity
Add to Gift Registry
Description

This coil has two vertical bends going up.  This configuration is not only used for HERMS systems where brewers don't want to drill a hole in the sidewall but fermentors as well.  The coil can be submersed in a fermentor through the lid and glycol or cold water is pumped through the coil to maintain the temperature.  The tubing is made out of 304/304L stainless and is measured 3/8" OD  (Outside Diameter).  This coil has a 6" Outside Diameter and the height is made per your request.  You must note in the comment section upon checkout the overall height from bottom coil to top connections. If you would like spacing between the coils for easy cleaning, please note this in the comment section as well.  No additional comments will leave the coil compressed for shipping and customer can space coils to their requirements.

Using a HERMS coil eliminates the need for a burner under your mash to maintain temperature and it will also help clarify your wort.  While you mash, your wort will travel through the coil which is installed in your HLT (Hot Liquor Tank).  The HLT will be hot and ready for sparging so you can also maintain your mash temperature with this as well.  While your running your wort through your coil your also filtering giving you great clarity.  HERMS systems help increase your efficiency and get you the original gravity your trying to achieve.

That's not all a HERMS coil can do, it can also cool!  Simply fill your HLT with ice and you've creating a cooling coil!

The maximum overall height listed in our shopping cart is set at 20"  Coils with any additional height will require a larger box which can increase shipping costs 
























Customer Reviews
Rating Fermentation Coil
 
I bought this for a fermentation coil in a SS brew bucket mini. Stainless Brewing does a great job of constructing these. The build quality is def high quality. I will say that if you are choosing to purchase the 3/8" tubing, it was difficult finding a fitting to get it through the bulkhead. I emailed stainless brewing and they have the right solution for me. you might want to add one or two of these to your order. If you are interested I used 10 inches as my coil height for the brew bucket mini. This was to avoid the spigot interfering with the coil when racking. SS Comp x MPT Bulkhead Part Number ISSD4BMC4 Don't forget to choose 3/8" If you want to avoid that all together 1/2 inch fittings seem to be abundant, so you might want to go with 1/2 inch tubing. Probably the direction you want to go with a rims or herms setup for better flow. I only went with 3/8" because my fermenter is tiny. If it works out and sanitation isn't a big issue i'll publish my findings for a cheap alternative to SS brew techs FTS temp control system for fermentation. These guys provide great customer service. Be confident in choosing to purchase from here.
  Did you find this helpful?   
Reviewed by: (Verified Buyer)  from Bay Area. - 6/27/2016
5/5
Related Items
Compression x Male Bulkhead Connector with Gasket and Washer
Compression x Male Bulkhead Connector with Gasket and Washer
Average Rating 10 Review(s)
Your Price: $13.84
1/2
1/2" Compression x 1/2" Male NPT weldless Bulkhead fitting
Average Rating 1 Review(s)
Your Price: $16.49
 
Recently Viewed Items