Shopping Cart Shopping Cart - 0 item(s) / Total: $0
Home > HERMS coils Custom coils

Herms Kit (ETA 5/1)

Part Number HRMKT
review 3 Review(s)
5
Herms Kit (ETA 5/1)
Email a friend Email a friend
Write a Review Write a Review
Price
Your Price:  
$274.99
Free Shipping
Choose Options
Pump
 
Coil Diameter
 
Quantity
Add to Gift Registry
Description
No more hassle on figuring out what fittings to order. Our HERMS Kit is an easy way to get everything you need to add a HERMS coil to your Hot Liquor Tank.
This kit includes:
15ft of Economy Tubing
4x 1/2 High Flow 90s
4x Type B Camlocks
3x Type A Camlocks
2x Type F Camlocks
2x Bulkhead Fittings with Gasket and Washer
2x 1/2" 3-piece Ball Valves
1x High Flow C Camlock
1x 50' HERMS Coil ( Either 10", 12-1/2", 14", or 16-1/2") using 1/2"OD x .035 304/304L ASTM A249/A269 Tubing

OPTIONAL:
1x Chugger Pump (Inline or Center head)
Customer Reviews
Rating Great Product
 
Did my first batch with this kit on Thanksgiving and the wort was crystal clear by the end of the Mash. This kit is a great idea, because it came with everything needed to install the coil in the HLT and build the hoses for the circulation. The only change that I would make is to change the nuts on the compression fitting to ones with a machined groove for the o-ring. The Herms coil is heavy and puts enough downward pull to cause the upper fitting to leak because it is not flat against the HLT. I had to really torque down the nuts on the fitting which caused the O-ring to bulge out and it still leaks a bit. I have grooved O-rings coming from Brewhardware to fix this problem. A very minor inconvenience that doesn't take away from the awesomeness of this product. Processing and shipping was much slower than advertised, but it got here. Buy the kit instead of piecemeal, you won't be disappointed.
  Did you find this helpful?    6 of 6 Found Helpful
Reviewed by: (Verified Buyer)  from Maryland. - 11/26/2016
5/5
Rating High Quality Products
 
I have yet to brew using the Herms kit. This kit is of the highest quality! I went with a 12 1/2" diameter coil for a 161/2" brew kettle and would recommend the 10" coil. Installing the 121/2"coil is almost impossible and once I did get it in, it is against the wall of the kettle. I will be replacing it with a 10" coil.
  Did you find this helpful?    1 of 1 Found Helpful
Reviewed by:  from Lake St Louis. - 8/4/2017
5/5
Rating Herms Coil Kit
 
All Parts were there and worked for my application. I just tested the system on a wet/ heat run and works just as planned. I am controlling the pump with a Inkbird controller to maintain my Mash Tun Temperture. I would highly recommend this kit if you are looking for a consistant Mash Temp.
  Did you find this helpful?   
Reviewed by: (Verified Buyer)  from Florida. - 5/7/2017
5/5
Related Items
HERMS 10
HERMS 10" Coil with 2 bends 50' x 1/2" OD Tubing 304 HERMS
Average Rating 68 Review(s)
Your Price: $99.99
  
Recently Viewed Items
Browse Similar Items